Sase SC8E, Руководство пользователя

Страница: 10 / 50

SASE Company, Inc. Scarifier SC8E User Manual
____________________________________________________________________________________________________
10
Maintenance
Proper belt tension must be maintained to transmit the engine/motor power to the cutting drum. An over
tensioned belt will shorten belt and bearing life.
A damaged, stretched or excessively worn belt should be replaced.
Check oil level before operation. Change engine oil and filter according to engine manufacturers
recommendations.
Engine Air Filter
Important! Clean air filter element daily
Inspect the air filter for excess dust, dirt or damage before the engine is operated. More often if operating in an
extremely dusty environment.
Operating the engine with a damaged or dirty air filter, or without an air filter, will allow dirt to enter the engine
causing premature engine wear which
is not covered under the engine manufacturer’s warranty.
Follow the engine manufacturer’s procedures for keeping filters in good condition.
Never work on or under equipment without first securing the equipment to prevent it from moving or falling.
Always work on a flat and level surface.
Remove spark plug lead on gasoline engine models or disconnect the supply voltage connector on electric
models before performing any maintenance.
Disconnect the power cord at the machine.
Operating Procedures for SC8E (GAS)
Start-Up

Add oil and gasoline to the machine.

Move the fuel valve lever to the ON position.

Move the choke lever to the CLOSED position (cold engine).

Move the throttle lever 1/3 of the way toward the FAST position.

Turn the engine switch to the ON position.

Operate the starter by lightly pulling the starter grip until you feel resistance, then pull briskly.

Gently return the starter grip.

Lower drum and begin grinding.

Read the following additional information before operating your scarifier.
Caution: Never tilt the unit back on the handle. Oil will flow into the cylinder head and could severely
damage the motor and void the warranty.