Sase PDG 8000P, Руководство пользователя

Страница: 39 / 73

Item No. Part No. Description Qty.
1 See Page 31 Bottom Drum II Assembled 1
2 PDG.8A009.00 SUBASSEM, PTO 1
3 PDG.8A008.00 SUBASSEM, PLANETARY 3
4 NB.12.249 SCREW, SOCKET HEAD CAP M12-1.75 X 25 12.9 ZINC 12
5 PDG.20207.0 2 ROD, MAIN BELT TENSIONER 1
6 PDG.80064.00 SPACER, ROD TIE DOWN 1
7 NB.15.251 SCREW, SOCKET HEAD SHOULDER M12 X 60 1
8 NB.30.134 WASHER, FLAT M12 ZINC 2
9 NB.20.113 NUT, HEXAGONAL M12-1.75 ZINC 1
10 NB.20.120 NUT, TENSIONER M12 1
11 PDG.20208.00 BAR, TENSIONER CONTROL 1
12 NB.10.230 SCREW, SOCKET HEAD CAP M8-1.25 X 30 2
13 PDG.80039.00 BELT, MAIN 1
14 PDG.80008.00 LINK, IDLER REINFORCING 1
15 NB.12.234 SCREW, SOCKET HEAD CAP M10-1.5 X 30 12.9 ZINC 2
2 PDG.8A009.00
Use Rubber Seal
along the hub base where the hub meets the hole 1
3 PDG.8A008.00
Use Rubber Seal along the hub base where the hub meets the hole
3
4 NB.12.249 Red LocTite 263, torque 80 ft-lbf 12
7 NB.15.251 Red LocTite 263 1
10 NB.20.120 Left loose until belt is at tension, then after belt is tensioned add Red LocTite 263 1
12 NB.10.230
Red LocTite 263
2
15 NB.12.234 Red LocTite 263, do not add, until belt is in place. 2
* PDG.8A005.01 Red LocTite 263, do not add, until belt is in place. *
Bottom Drum III Assembly
Bottom Drum III Assembly Supplement