Sartorius IS 64 FEG-S0CE, Инструкция по установке и эксплуатации

Страница: 7 / 45

6
Installation Instructions
Sartorius dealers or service technicians, who have received special training,
will help you set up the weighing platform and show you how to operate it.
Ambient Conditions
Choose a suitable place to set up the weighing platform. Avoid exposing
the weighing platform to the following ambient conditions:
—
Extreme heat radiation
—
Extreme Vibration
—
Places that are difficult to access for cleaning and maintenance
Important Note
lf you need to use the weighing platform in areas exposed to heavy traffic
(e.g., fork-lift trucks), you should install a protective frame, consisting of
angular braces, around the weighing platform. To calculate the dimensions
for this protective frame, refer to the section entitled "Dimensions (Scale
Drawings)."
Conditioning the Weighing Platform
Do not expose the weighing platform to extreme moisture over long
periods. Moisture in the air can condense on the surfaces of a cold platform
whenever it is brought to a substantially warmer place. lf you transfer the
weighing platform to a warmer area, make sure to condition it for about 2
hours at the new ambient temperature, leaving it unplugged from the power
supply. Afterwards, if you keep the weighing platform connected to the
power supply, the continuous positive difference between the inside of the
platform and the outside will practically rule out the effects of moisture
condensation.