Operating Menu Navigation
Purpose
You can configure the scale by choos-
ing from parameters options in the
Setup menu to adapt the scale to indi-
vidual requirements.
Features
The parameters are combined in the
following groups (highest menu level):
1 Scale functions
2 Application programs
3 Application parameters
5 Interface
6 Printout in weighing mode
7 Printouts from application programs
8 Extra functions
9 Reset (restore factory settings)
Factory Settings
Factory-set parameters are identified by
an “o” in the list on the following pages
(“Operating Menu Overview”).
Preparation
§
Switch off the scale: press the
e
[On/Off/Standby] key
§
Switch the scale back on: press
e
[On/Off/Standby]; while all segments
are lit: press the
)
[Tare] key briefly
> Measured value/result line:
1
(1st menu
level)
$
To scroll through the items on one
menu level, press:
)
[Tare]; after the
last item is reached, the first is dis-
played again
$
To confirm the highlighted item and
open the submenu (2nd menu level),
press
p
[Print]
$
To return to the next higher menu level,
press
p
[Print]
§
To confirm a new setting, press and
hold
p
[Print] (2 sec)
> “o” indicates the active setting
§
To save changes and exit the menu,
press and hold the
)
[Tare] key (2
sec)
§
To exit without saving changes, press
e
[On/Off/Standby]
> Restart the application
12
12
Configuration
