4
Installation Instructions
Your balance/ scale is designed to
provide reliable weighing results under
normal ambient conditions. W hen
choosing a location to set up your
balance/ scale, observe the following
so that you will be able to work with
added speed and accuracy:
Set up the balance/ scale on
a stable, even surface
Avoid placing the balance/ scale
in close proximity to a heater or
otherwise exposing the balance/
scale to heat or direct sunlight
Protect the balance/ scale
from drafts that come from open
windows or doors
Avoid exposing the balance/ scale
to extreme vibrations during
weighing
Protect the balance/ scale from
aggressive chemical vapors
Do not expose the balance/
scale to extreme moisture over long
periods
Conditioning the Balance/ Scale:
Moisture in the air can condense
on the surfaces of a cold balance/
scale whenever it is brought into a
substantially warmer place. If you
transfer the balance/ scale to a
warmer area, make sure to condition it
for about 2 hours at room temperature,
leaving it unplugged from AC power.
Information
on Radio Frequency Interference
Warning!
This equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instruction
manual, may cause interference to
radio communications. It has been
tested and found to comply with the
limits for a Class A computing device
pursuant to Subpart J of Part 15 of
FCC Rules, which are designed to
provide reasonable protection against
such interference, when operated in a
commercial environment. Operation of
this equipment in a residential area is
likely to cause interference, in which
case the user, at his own expense, will
be required to take whatever measures
may be required to correct the
interference.
