Instruction Manual Built-In WOK-Induction Cooking Plate Model ZAHIRA
Continuation „Installation and start-up“
•
Place induction wok with the food to be cooked in the centre of the hotplate. Do not place
the wok without food on the cooker.
•
Press power ON/OFF key, power indication lamp will be on.
•
If the heating indicator light is on, then the pan is heating.
•
Rotate control knob to required setting. The LED display will show the settings 1-19.
HEAT (setting 1 to 19)
•
Set heating level by rotating the power control knob 1-19. LED display will show
the level settings. (See Step C)
NOTE
If the indicating light is OFF and there is a beeping noise this indicates that
•
the wok is not suitable
•
there is no wok on the top
•
The unit is equipped with an “OVERHEATING PROTECTION DEVICE”. When the
temperature of the wok is too hot, the power will cut out. The heating indication light
will flash indicating that the over heating function is on.
CAUSE OF OVERHEATING
If an empty wok is placed on the ceramic top and the power level is at maximum the
ceramic surface will reach high temperature very quickly. Once the wok is removed from
the unit or food/liquid is added to the wok, the surface temperature of the ceramic top will
reduce very rapidly.
CONTROL PANEL
page 3 of 5
