saro WKS96, Руководство по эксплуатации

Страница: 3 / 7

5. Unplug from the outlet when not in use, when moving from one location to another or before
cleaning.
6. To disconnect the appliance, grip the plug and pull it from the wall outlet. Never pull by the cord.
7. Do not operate the appliance in the presence of explosive and/or flammable fumes.
8. Do not place the appliance or any of its parts near an open flame, cooking or other heating
appliance.
9. Do not operate the appliance with a damaged cord or plug. If the product malfunctions, or if it is
dropped or damaged in any manner, do not use.
10. The use of attachments is not recommended and may be hazardous.
11. Place the unit on a dry level surface.
12. Do not operate if the housing is removed or damaged.
13. A loose fit between the AC outlet (receptacle) and plug may cause overheating and a distortion of
the plug. Contact a qualified electrician to replace loose or worn outlet.
14. This appliance is designed to be built-in (fully recessed) or free standing.
15. The wine cooler
is intended for use in a controlled ambient location such that the ambient
temperature does not exceed 32°C (90°F) .
16. Locate the unit away from direct sunlight and sources of heat (stove, heater radiator, etc.). Direct
sunlight will affect/alter the outside color of the appliance.
WARNING: To reduce the risk of fire, electric shock or personal injury, unplug or disconnect the
appliance from the power supply before servicing
.
OPERATING INSTRUCTIONS
1. Place your wine cooler on a flat surface that is strong enough to support the unit when fully loaded.
2. This wine cooler is designed to be free standing.
3. Do not place heavy objects on top of the unit.
4. Do not place the unit in a moist place or display in direct sunlight.
5. Do not place the unit next to a major appliance that emits large amounts of heat, such as a
dishwasher, microwave, toaster oven, oven or barbecue, etc.
6. Do not plug unit into the same outlet as a refrigerator or microwave.
7. The unit’s cooling system operates efficiently with an ambient temperature of less than 32°C (90°F).
Do not install in a garage or basement.
8. Determine the best setting to use: refer to the temperature guides for appropriate serving. An easy
reference guide for serving temperatures is also found on the inside door.
9. Place bottles inside the cooler.
10. Plug the power cord into a standard electrical outlet.
Important: When using the wine cooler for the first time, allow at least 24 hours for the internal
temperature to adjust properly, Make sure there are at least 3 to 5 bottles in the unit.
ALWAYS REMOVE ALL BOTTLES BEFORE MOVING THE WINE COOLER
TEMPERATURE CONTROL
Important note: In order to operate efficiently, thermoelectric products should be in an
environment with an ambient temperature of less than 32°C (90°F).
Setting the temperature control (presets):
For your convenience, the wine cooler is programmed at storing temperature. The temperature pre-set
by the manufacturer is 13
℃
(55
℉
), which the indicator will display. To change the preset temperature in
the wine cooler, simply press the Preset button until the desired number appears.
Setting the temperature control (manually);
The new touch control screen design, in order to prevent accidental contact, the design adds the lock
and
°C/°F
Switch function. After finishing the temperature regulation
，
press the
°C/°F
Switch function
for 3 seconds,click to
°F
, click again to
°C
.
2