Model No. CB-20A
20 FEB 2008
Pg. 7
TROUBLE SHOOTING
If your induction unit appears not to be working properly, it doesn't necessarily mean it's faulty. In all
cases, check the following points.
Malfunction Check…..
No indication light when power "on"
Cable/terminal block is loose
Broken circuit of fuse; or automatic switch in the
power supply
No
Power
supply
Heating indicator does not light, or is
flashing
Unsuitable cooking utensil
Appliance fails to heat up
No pan on the ceramic top
Utensil is not located at the centre of the ceramic
plate
Utensil is smaller than 5cm
Appliance suddenly stops heating
during operation
Over-heating protection activated
Air entrance or outlet is blocked.
High ambient temperature
If you fail to identify the problem contact the after-sales service without delay.
