Sarlo WeedBoss CS-16 Скачать руководство пользователя страница 12

10

WARRANTY

SARLO MANUFACTURING, INC.

hereby warrants to the original retail purchaser ALL NEW

products of its own manufacture to be free from defect in material and workmanship, for a period of
two (2) years form the date of the original purchase, subject to the following exceptions.

Products

Consumer Use

Commercial/Rental Use

Hand Held String Trimmers

2 Years

90 Days

• 

No warranty is extended to any equipment, which has been misused, neglected, or
damaged by accident. Sarlo shall not be responsible for damage in transit or
handling by any common carrier. Under no circumstances, within or without the
warranty period, will the company be liable for damage for loss, or damage resulting
from delay, or any consequential damage including but not limited to any cost or
expense of providing substitute equipment or service during periods of malfunction
or non-use. Sarlo will repair or replace, free of charge any part or parts of the units
found upon examination by any Factory Authorized Dealer or by the factory to be
defective in materials and or workmanship for the term of the warranty.

• 

The consumer is responsible for: (1) normal maintenance such as greasing, gear
case lubrication, minor adjustment and (2) transportation of any Sarlo product to and
from the place warranty work is performed.

• 

Sarlo warranty WILL NOT APPLY to any products repaired or altered by anyone other
than an Authorized Service Distributor or Authorized Service Dealer.

• 

Sarlo reserves the right to incorporate any changes in design into its products
without obligation to make changes on units previously manufactured.

• 

For engine warranty, please refer to the Briggs & Stratton manual.

Содержание WeedBoss CS-16













Отзывы: