Instruction Manual
Ed. December 2019
Hydro-pneumatic tool for blind rivets
3.0 ÷ 6.4 mm all alloys, and 7.8 mm aluminum
SAR 008
6
5.
NEVER allow Mandrel Bottle to fill more than 1/3 full; damage to Hydraulic Plunger may occur. To
empty Mandrel Bottle, turn knob at end of bottle to reveal bottle opening. Shake mandrels out of
hole. Once emptied, turn knob until opening is closed and Mandrel Bottle is resealed.
6.
If you pull different rivets, shut off
“
0
”
the air flow Lever #89 see (A) , then adjust to Regulator #83A
(see fig. B) till suitable for the air flow.
Regulator
Figure A: part #89
Figure B: part #83
IMPORTANT: CORRESPONDANCE NOSEPIECE
–
PUSHER TUBE
The standard tool is supplied with nosepiece and relevant pusher tube already installed.
If you need to install different rivet measures, make sure you change both the nosepiece and the
pusher tube, choosing them accordingly to the rivet to be applied (see table ACCESSORIES).