MOUNT CARRIER TO VEHICLE CONTINUED:
Place lanyard
ring around
sleeve. Insert
final bolt into
receiver base,
through sleeve
and out through
the other side
of the receiver
base.
Attach 3/8” washer and nut.
Tighten with a 9/16” wrench.
Attach bolt and securely tighten all
bolts with two 3/4” wrenches.
7
8
9
5
6
Attach nut loosely-do not
fully tighten until all nuts
and bolts are loosely
placed.
Attach 1/2”washer.
2
Insert rack into the receiver base
and insert long bolt into receiver
and rack as shown.
Insert pin into
bottom hole as
shown.
(Note: Pin can be removed when
rack is empty to fold rack down.
Do not drive with rack in down
position)
Secure with clip.
3
4
All manuals and user guides at all-guides.com