Quick Installation Guide
Introduction
Diamond Assay Service
2
Introduction
Congratulations on purchasing the DiaScan S+ portable proportion scanner
and joining the Diamond Assay Service. Once you have installed the
software you only need to plug the machine into any 110/220 Volt outlet
and connect it to a USB port on your PC.
This document describes how to install the software in two simple steps.
STEP 1 – Start Installing the Software
1. Please do not connect your DiaScan S+ until instructed to.
Load the installation CD into your PC CD/DVD reader, the installation
should start automatically.
If not, open
My Computer
, right click the CD reader where you have
loaded the Sarin Installation CD and click
Open
. From the displayed
list of files, double click
Setup.exe
.
