Sargent EC200, Руководство пользователя

Страница: 8 / 11

Sargent Electrical Services Ltd. Copyright 2005
Issue 03 Page 8 of 11 12 May 2005
Use the select button (? ) to change <EXTERNAL> = The External
pump will be operated by the
pump switch
<BOTH> = Both the Internal
and External pumps will be
operated simultaneously by the
pump switch
Water Tank
Fill?
<Start 1 Min>
Allows operation of the External pump for a
period of one minute (for filling the internal
tank from the external tank)
Use the select button (? ) to START (or
STOP)
Will have no effect if the
External pump is already
switched on (see above)
Will not operate if the Internal
(Fresh) water tank is showing
100% Full
Clock Set?
12:00
Access to set the internal clock
Press the select button (? ) to select HOUR
Use the up / down (? ? ) buttons to change
Press the select button (? ) to select MINUTE
Use the up / down (? ? ) buttons to change
Press the select button (? ) to exit
Please note the clock uses a
24 hour cycle
Alarm Set?
12:00
Access to set the alarm clock
Press the select button (? ) to select HOUR
Use the up / down (? ? ) buttons to change
Press the select button (? ) to select MINUTE
Use the up / down (? ? ) buttons to change
Press the select button (? ) to exit
Please note the alarm uses a
24 hour cycle
Alarm = Off
Shows the alarm clock status (on / off)
Press the select button (? ) to switch between
OFF or ON
The addition of a asterisk (*) in
the top left of the main display
indicates that the alarm is set
Set Event
Timer?
Access to set the event timer
Press the select button (? ) to select HOUR
ON
Use the up / down (? ? ) buttons to change
Press the select button (? ) to select MINUTE
ON
Use the up / down (? ? ) buttons to change
Press the select button (? ) to select HOUR
OFF
Use the up / down (? ? ) buttons to change
Press the select button (? ) to select MINUTE
OFF
Use the up / down (? ? ) buttons to change
Press the select button (? ) to exit
[Only available in H and M specification
systems]
Please note the event timer
uses a 24 hour cycle
The event timer is used to
switch the control panel power
on and off in the absence of
the user / occupier.
See section 4.5 for further
details.
Event Timer
=Off
12:00 till
12:00
Shows the event timer status (OFF / ON) and
the current On and Off times
Press the select button (? ) to switch between
OFF or ON
[Only available in H and M specification
systems]
The addition of a hash (#) in
the top right of the main display
indicates that the event timer is
set