1-800-727-5477 • www.sargentlock.com
A6703H 07/21
Copyright © 2008, 2012, 2021 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express
written permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
WARNING
This product can expose you to lead
which is known to the state of California
to cause cancer and birth defects or other
reproductive harm. For more information go
to www.P65warnings.ca.gov.
16 Function
16, 28, 63 & 66 Functions
Mount rim cylinder with (2) screws through
chassis.
2
Prepare Door
3
Apply Hardware
4
Apply Rail Assembly
• If cutting is not required, skip to 4b.
5
Apply Covers and Strike
Installation Instructions
Horizontal reference line (37-5/8" from
finished floor for 41" height center of
push rail)
Vertical reference line C of chassis
L
a
Tape template on inside of the door along the reference.
b
Spot and drill holes.
a
Attach chassis to the door with (4) #10 mounting screws.
Through-bolt outside trim and cylinder chassis if used. Leave chassis
screws slightly loose until after step 4b.
a
Check box label for rail size and refer to the Available Stock Lengths on page 1 for the door sizes.
a
Attach cover to chassis with four (4) cover screws.
b
Attach end cap to mounting plate with two cover screws.
28, 63 & 66 Function
• If cutting is required, determine cut off dimension “X” by subtracting
1-3/4” from dimension “Y”. (See Figure 2.) Mark cut off point on mounting rail.
Depress arm into rail opening and slide rail onto chassis. Attach rail assembly to the
chassis with two #8 truss head machine screws.
Level rail. Place mounting plate tight against rail and attach it to the door
with two #10 round head screws.
Figure 2
Rail Assembly
Chassis
Machine Screw
b
c
Attach 649 Strike (for Fire Rated application) with (2) outer screws and
adjust for proper position. Drill and tap through the two holes in the
strike frame and fasten strike in place with (2) inner screws.
Attach 649 Strike (for non-Fire Rated application) with (2) strike screws
and two lock washers.
c
d
b
