STEP 15: Program Lock
• (See Operating Instructions)
IMPORTANT:
Test the lock function at least three
times with the door open before closing the
safe door with
S&G 3006 Pivot Bolt USB Audit Lock
3006 PivotBolt Specifications
Attaching Screws:
Use only the screws provided with the lock. They
must engage the mounting plate by at least four full threads. Do not use
lock washers or thread sealing compounds.
Recommended Attaching Screw Torque:
30 to 40 inchpounds (33.9 to 45.2 dNm)
Minimum Lock Cable (Spindle) Hole Diameter:
0.312 inch (7.9 mm)
Maximum Lock Cable (Spindle) Hole Diameter:
0.406 inch (10.3 mm)
Lock is Designed to Move:
0.0 lbs. (0 Newtons)
Lock Bolt Maximum Free Movement:
0.352 inch (8.95 mm)
0.109 inch outside the edge of the lock case
Maximum Bolt End Pressure:
lock is designed to withstand at least 225 lbs. (1000
Newtons)
Maximum Bolt Side Pressure:
safe and container boltwork or
locking cam designs must never apply more than 225 lbs. (1000 Newtons)
of side pressure on the lock bolt.
Mounting Environment:
The lock body is designed to be mounted inside a secure
container. The container must be constructed to offer protection against physical
attack directed at the lock. The amount of protection is dependent on the desired level
of security for the system as a whole. Lock protection may include barrier materials,
relock d
evices, thermal barriers, thermal relock components, or any combination
of these. Relock device attaching screws must NOT be longer than the depth of
the tapped hole provided in the lock case.
Security relevant parts of a high
security lock should not be accessible to unauthorized persons when the door of
the secure storage unit to which it is fitted is open
.
A minimum distance of .150
inch (3,8 mm)
is recommended between the end of the lock case and the closest
approach of the safe’s blocking bar or cam plate (which is normally blocked by the
extended lock bolt). Maintaining this clearance will allow the lock to deliver optimum
performance.
Code Restrictions:
Personal data that can be related to a code holder,
such as a birth date, street number, or phone number, should not be used in creating a
lock code. Avoid codes that can be easily guessed (such as 1 2 3 4 5 6 or 1 1 1 1 1 1). The
lock’s factory default code must be changed to a unique, secure code when the lock is
put into operation by the end user.
Note:
Every installation of this product must comply with these
requirements and
those in the product installation instructions to qualify for the
manufacturer’s warranty and to comply with EN1300 requirements.
Confidential
The information contained in this document is proprietary to Sargent & Greenleaf, Inc. Publication or
duplication of this copyrighted document is strictly prohibited.
S&G Audit Lock Electronic Safe Lock
Limited Warranty
Sargent & Greenleaf, Inc.
A Wholly Owned Subsidiary of Stanley Security Solutions, Inc.
PO Box 930
Nicholasville, KY 40356
Phone: (800)-826-7652 Fax: (800)-634-4843
Phone: (859)-885-9411 Fax: (859)-887-2057
Sargent & Greenleaf S.A.
9, Chemin du Croset
1024 Ecublens, Switzerland
Phone: +41-21 694 34 00
Fax: +41-21 694 34 09
