Type
Condenser Microphone
Polar Pattern
Super Directional
Frequency Response
20HZ---20KHZ
Sensitivity
-30±3dB(0dB=1V/Pa,at 1kHZ)
Signal to Noise Ratio
75dB or more
Output Impedance
200Ohm or less
Power
Two AA batteries
Plug
Mini-pin plug (3.5mm)
Filter
High-pass filter (150Hz)
Dimensions(LxHxD)
253 x 69.4 x 98.4 mm
Net Weight
270g (9.5 oz.)
Frequency Response
Vmic Pro
Super Directional Video Condenser Microphone For DSLR Cameras
and Video Cameras
www.saramonic.com
The Saramonic logo is trademark which is registered
and owned by Saramonic International.
COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL
A brand of DSQN
Email: [email protected]
2.2 Attach the Vmic Pro to the hot shoe of your camera or camcorder.
Connect the supplied audio transmission line from the audio output of Vmic
Pro to the MIC input of the camera or camcorder.
2.3 Turn on your camera and long press the power button to turn
the Vmic Pro on, the LED indicator will turn green. When the battery
power is low, the LED indicator will turn red.
2.4 Adjust the level control according to your needs.
The -10dB level: ideal for recording loud sound sources, such as live
music, motorsport, or interviews where the subject is very close to
the camera.
The +20dB level boost: For use with DSLR cameras, allowing the
user to reduce the camera's preamp level (or mic-input level),
effectively reducing the amount of noise generated by the camera's
comparatively low quality audio circuitry.
2.5 Plug a headphone to the headphone output of the Vmic Pro, then
you can monitor the audio.
We suggest you could do a test recording and playback the audio to
see if it is acceptable.
3. Specification
