Saracen D12207 Скачать руководство пользователя страница 3

Страница: 3 / 3

8. When you have identified a suitable fixing location the hanger rod can be used as a guide to

mark the position of the ceiling support bracket. Ensure the hanger rod is vertical in all

directions before marking the location of the ceiling support bracket onto the ceiling.

9. If using a wall plug, drill a hole using a 5.5mm drill bit and insert the wall plug. Fit the 1

1/4

”

screw into the ceiling support bracket and screw into the wall plug or joist (see Fig.4).

10. Position the hanger rod into the ceiling support bracket and secure into position using the

1/4

” self tapping screw.

11. The assembled rail can then be pushed into the wall brackets and secured into position by

tightening the two screws on the top of the wall brackets - see Fig.2.

Product Care

To retain the best quality finish, clean product regularly with a soft damp cloth.

Do not use abrasive or chemical cleaners as these will damage the product.

Wolseley UK Ltd

Warwickshire

CV31 3HH

www.wolseley.co.uk

R&R 049 R01

Fig.4

Содержание D12207

Страница 1: ...n cables and pipework before drilling and take extreme care if there is any water in the working area It is advisable to use a residual current circuit breaker RCCB Always wear suitable eye protection...

Страница 2: ...is to be fitted onto a ceramic tiled wall a ceramic drill bit should be used 5 Insert the wall plugs flush to the surface of the wall If fitting to a tiled surface the wall plug should be inserted bel...

Страница 3: ...ng support bracket and screw into the wall plug or joist see Fig 4 10 Position the hanger rod into the ceiling support bracket and secure into position using the 1 4 self tapping screw 11 The assemble...