~ 38 ~
Device reset time-out
Sets USB mass storage devices start unit command time-out.
Options: 10 sec, 20 sec, 30 sec, 40 sec.
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
controller. ‘Auto’ uses default values; for a Root port it is 100ms, for a Hub port
the delay is taken from Hub descriptor.
Options: Auto, Manual.
H/W Monitor
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
PC Health Status
CPU Temperature
: +48 C
VREG Temperature
: +37 C
System Temperature
: +25 C
CPU Fan Speed
: 3080 RPM
Power Fan Speed
: 1067 RPM
Chassis Fan Speed
: 1012 RPM
VCC3V
: +3.360 V
APU
: +1.176 V
APU_NB
: +1.168 V
FCH
: +1.096 V
DIMM
: +1.512 V
APU_VDDR
: +12.184 V
APU_VDDP
: +1.208 V
VSB3V
: +3.296 V
VBAT
: +3.344 V
CPU Fan Type
[PWM FAN (4 pin)]
CPU Fan Mode Setting
[SmartFan]
Temperature Limit of Highest
060
Temperature Limit of Lowest
030
Fan Highest setting
100
Fan Lowest setting
050
Power Fan Mode Setting
[SmartFan]
Temperature Limit of Highest
060
Temperature Limit of Lowest
030
Fan Highest setting
100
Fan Lowest setting
050
Chassis Fan Mode Setting
[SmartFan]
Temperature Limit of Highest
060
Temperature Limit of Lowest
030
Fan Highest setting
100
Fan Lowest setting
050
Version 2.13.1216. Copyright (C) 2011 American Megatrends, Inc.
PWM Fan (4 pin)
Linear Fan (3 pin)
: Select
Screen
:
Select Item
Enter: Select
+/-: Change
Opt.
F1: General
Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save
and
Exit
ESC: Exit
