E350 Mainboard
~ 24 ~
USB transfer time-out
The time-out value for control, bulk, and interrupt transfers.
Options: 1 sec, 5 sec, 10 sec, 20 sec.
Device reset time-out
Sets USB mass storage devices start unit command time-out.
Options: 10 sec, 20 sec, 30 sec, 40 sec.
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
controller. ‘Auto’ uses default values; for a Root port it is 100ms, for a Hub port
the delay is taken from Hub descriptor.
Options: Auto, Manual.
Super IO Configuration
Serial Port 0 Configuration
Select parameters for Serial Port 0.
Options: Enabled, Disabled.
Change Settings
Select an optimal setting for super I/O device.
Options: Auto, IO=3F8h IRQ=4, IO=3F8h IRQ=3,4,5,6,7,10,11,12,
IO=2F8h IRQ=3,4,5,6,7,10,11,12, IO=3E8h IRQ=3,4,5,6,7,10,11,12,
IO=2E8h IRQ=3,4,5,6,7,10,11,12
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Advanced
Super IO Configuration
Super IO Chip
Fintek F71808
Serial Port 0 Configuration
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Set Parameters of Serial Port 0.
ÆÅ
: Select
Screen
:
Select Item
Enter: Select
+/-: Change
Opt.
F1: General
Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save
and
Exit
ESC: Exit
