Sapphire Audio Magic Eyes, Руководство пользователя

Страница: 9 / 12

9
3. Parameter adjustment
Only under non-working status (when the READY button is blue), the parameters can be adjusted and the
hand piece can be chosen. The “+”, “-” button is for adjustment.
After the parameters are adjusted, if you change the hand piece, or press the “BACK” button, the
parameters will return back to initial value.
4. Working status
Set all the parameters, press the “READY” button, the device will enter into a working status. The
“READY” button will turn yellow and there will be a progress bar for the hand piece.
Then press the pedal and the treatment will start. During the treatment, the time parameters will start a
count down. When the time is 00:00, it will sound an alarm and the treatment will be complete.
5. The machine and parameter status
On the left side of the interface, it will show the device status and parameters of current hand piece
(temperature, air pressure etc.)
Device status: SETTING, READY, WORKING and other alarm information. SETTING is before starting
the machine, the parameters can be adjusted. READY is when the machine is starting, but the pedal is
not working.
WORKING is when the machine has started and the pedal is working at the same time.
If it shows other status information, this means that the machine has something wrong and it cannot go
back to working status. Please turn off the power supply and restart the device. If the device still does not
work, please contact the manufacturer.
6. Software update
When the machine is in network mode and there is a new software version available, you will get an
update indication.
SETTING
D1 0
o
C