REQUIRED TOOLS:
Flat bladed screwdriver (not included)
SAFETY POINT
**The lowest position is the safest and
the base should always be used in that
position as soon as the baby is old
enough to sit up.
Secure fixed side (part 3) to
the cot ends (part 1) using the
bolts (part G) and nuts (part B)
as in (fig. 1 & 2).make sure the
stickers on the ends are facing
each other
Assembly instructions
Stage 1 fixed side to ends
Fig 1
Fig 2
Stage 2 Drop side
Fix the bottom rail supports
securely to the end using the bolts
as shown (fig 3)
Holding the drop side rail, push the
rod through the top rail into
bottom rail and into the bottom
bracket
Fix the top rail support and gravity
catch (marked left or right) as
shown (fig.
4)
Fig 3
Fix the bottom rail supports
(part D) securely to the end
using the bolts (part A) as
shown (fig 4) Holding the drop
side rail, push the rod through
the top rail into bottom rail
and into the bottom bracket.
Fix the top rail support (part E)
and gravity catch (parts F)
(marked left or right) as
shown (fig.
5)
Fig 4
Place the mattress base (part
4) in position (mesh on top) so
that the edge marked towards
fixed side is against fixed side
of the cot. Using the big bolts
(part G) and the two bolts
attached to the ends (fig 3).
Stage 2 base to ends
Fig 5
2
