1 2
3 4
6
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Wall Mount Installation - Round Metal Clock
3) Insert a #10 screw into each wall anchor.
1) Mark a point on the wall for each wall anchor.
For 12” Clocks, the top mark should be 2.75 inches
(7 cm) away from the ceiling.
For 16” Clocks, the top mark should be 5 inches
(12.7 cm) away from the ceiling.
Use a level to position the bottom mark 8.5 inches
(21.6 cm) below the top mark.
2) Use the 1/4 inch drill to drill holes at the locations
of the two marks, then Insert a wall anchor into
each hole.
4) Use the gray wheel on the movement to set
the hour and minute hands. Rotate the wheel
clockwise for an earlier time, or counterclockwise
for a later time.
17” Minimum
43.2 cm
8.5” (21.6 cm)
12” Clock - 2.75” (7 cm)
16” Clock - 5.0” (12.7 cm)
