Place 1 x crib end (part 2) on the floor with the screw inserts holes
facing upwards. Loosely attach 2 x crib sides (part 7) to the crib end
(part 2) using 4 x large bolts (part A). Making sure the grooves on the
sides are inside and at the bottom. Attach 1 x crib base support end
(part 9) to the mattress base (part 8) gently slide the mattress base
(part 8) into the grooves on the crib sides (part 7) so that the base
support end meets the crib end.
PLEASE PLACE THE MATTRESS BASE IN THE CORRECT POSITION, SO THAT THE
TWO SAFETY LABELS ARE FACING UPWARDS
Attach the other base
support end (part 9) onto the other end/top end of the mattress base.
Attach the 2
nd
crib end (part 2) onto the crib sides by using 4 x large
bolts (part A)
.
As in (figure 2)
PLEASE
ENSURE THAT THE BASE IS
FULLY ENGAGED INTO GROOVES BEFORE TIGHTENING)
.
Assembly instructions
Stage 3 assembling of the crib body
3
Figure 1
