_
English
_
Cleaning and Care
1.
Remove the comb attachment.
2.
Press the shaving head towards the back and remove it.
3.
Brush out the shaving head insert (it is the area behind the shaving head when it has been removed).
4.
Reinsert the shaving head by inserting the latch of the shaving head into the groove of the casing.
5.
Press the shaving head back into the casing, until it engages audibly.
6.
Wet/dry design, for use in shower and easy cleaning.
Oiling the Shaving Head
Push the blade to make it apart from the housing. Clean the blade with the cleaning brush and then
press the cleaning lever to open the blade and sweep away hair that remained between the blades. After that,
put 2 or 3 drops of oil between the blades to lubricate them. It is necessary to clean and lubricate the blade
after every few times uses to keep the clipper in good condition. Follow the procedure that reverses the
above to reassemble the clipper, push the blade until it firmly clicks into position.
