Sapir SP-7100-JEF, Инструкция по эксплуатации

Страница: 2 / 21

_ English _
Installation instructions:
1. Please fix the faucet and connect the water pipe correctly; turn the handle and let the water
out, and check if there is any water leakage.
2. Connect the power supply.
3. Heating indicator light will be on when turning to hot water level and begin to heat up, while
turning to cold water level the light will be off and stop heating.
Usage:
1. How to use the handle switch
As shown below, the rotation range is 0-150 degrees. Each of hot water area and cold water
area is 60 degrees, while the remaining 30 degrees is no water area.
2. The usage of indicator light
If heating indicator light is ON that indicates heating at the moment.
3. Regular cleaning of nozzle
Open the nozzle and put it upside down under the high pressure faucet until it is clean
enough.
Hot water Hot water Cold water
Cold water
No water
No water
Nozzle
Handle switch
Faucet body
Basin
Connecting screw
Water pipe
Power cord
Connecting nut