WEIGHING STEP
1.
Under the time state press the “ON/TARE” key to power on the scale. After 3 second zero will be
shown after “88888” appear on the display.
2.
Press the “UNIT” key to change the weighing unit to “g”, “oz” or “lb”.
3.
Under the weigh state, put the container on the glass. The LCD will show the weight of the container.
4.
Press the “TARE/ON” key to zero the scale. The weight of the container will be cleared. Then put food
into the container, the weight of the food only will appear on the display.
5.
Hold the “TARE/ON” key for 3 seconds to power off the scale.
ERROR DISPLAY INTRODUCTION
•
When the scale is over loaded, the “
0-ld
” will appear on the display.
•
When the screen shows
, it means that the power is low. Please change the batteries as soon as
