8
Configuration
4
. Select “WAN Interface” is Ethernet Port. Select your “WAN Access Type” according to your Internet source, and
enter the username/password. Then, you can start to setup the wireless encryption.
1.
Open IE browser, type IP 192.168.1.1(P.1), or open
“My Network Place”, and click SAPIDO_RB-1632(P2).
It can be configured without Internet.
Enter the router IP address (defaults below) into your browser and hit “Enter”.
Router Mode : 192.168.1.1
Access Point & WiFi Access Point Mode : 192.168.1.254
Enter Login Information (default below) and click “Login”.
Username : admin
Password : admin
(P1)
192.168.1.1
3
. Select “One Button Setup”(P4) on the left menu.
2.
Fill in default Username and Password to login(P3).
(P3)
admin
admin
(P4)
(P2
SAPIDO_RB-1632
Switch the operation mode to “R”.
5.
After the setting is finished, you should see a “change successful” page with countdown. When the countdown
is completed, your wireless network and security will be active, and you should be able to login immediately with
the new password. However, if an error message shows up, please refresh the page and it will go back to the
entering page. Afterwards, you can access Internet.
Logging Into Your Router :
Connecting this Router to a Cable/DSL Modem :
