Sanyo XT-43S7300F, Руководство пользователя

Страница: 17 / 20

17
Most problems you encounter with your TV can be
corrected by consulting the following troubleshooting list.
2. Plug another electrical device into the outlet to make
sure it is working or turned on.
3. Power plug is in a bad contact with the outlet.
4. Check the signal source.
Troubleshooting
1. Change the color system.
2. Adjust the saturation.
3. Try another channel. Black-white program may be
received.
No color
No picture, no sound
1. Change the batteries.
2. Batteries are not installed correctly.
3. Main power is not connected.
Remote control does not work
1. Adjust the brightness and contrast.
2. Broadcasting failure may happen.
No picture, normal sound
1. Press the Vol+ button to increase volume.
2. Volume is set to mute, press the mute button to restore
sound.
3. Change the sound system.
4. Broadcasting failure may happen.
Normal picture, no sound
It is usually caused by local interference, such as cars,
daylight lamps and hair driers. Adjust the antenna to
minimize the interference.
Unorderly ripples on the picture
Perhaps the TV can not recognize the resolution set by
the PC. Suggest to change to the best resolution or other
standard resolutions of the Windows system.
Blank screen when connected computer system
If the antenna is located in the fringe area of a television
signal where the signal is weak, the picture may be marred
by dots. When the signal is extremely weak, it may be
necessary to install a special antenna to improve the
reception.
Snowy dots and interference
1. Adjust the position and orientation of the indoor/outdoor
antenna.
2. Check the connection of antenna.
3. Fine tune the channel.
4. Try another channel. Broadcasting failure may happen.
Black spots or horizontal streaks appear, or the picture
flutters or drifts. This is usually caused by interference
from car ignition system, neon lamps, electric drills, or
other electrical appliance.
Ignition
This interference produces moving ripples or diagonal
streaks, and in some case, loss of contrast in the picture.
Find out and remove the radio interference source.
Radio frequency interference
1. Lead (Pb) – not over 0.1% by weight;
2. Cadmium (Cd) – not over 0.01% by weight;
3. Mercury (Hg) – not over 0.1% by weight;
6+ 4. Hexavalent chromium (Cr ) – not over 0.1% by weight;
5. Polybrominated biphenyls (PBBs) – not over 0.1% by weight;
Declaration of Conformity with the requirements of the E - Waste (Management) Rules-2016
The Product is in conformity with the requirements of the reduction of hazardous substances
The content of hazardous substance with the exemption of the applications listed in SCHEDULE II
of the E-Waste Rules-2016
of the E-Waste Rules-2016
resources,
Please see the Sanyo website for further information on collection centers,etc.
or call the customer care toll-free number
Sanyo
Customer care number ( Toll free ) : 1800 419 5088
https://www.sanyoappliance.in/e-waste-program/
6. Polybrominated diphenyls ethers (PBDEs) – not over 0.1% by weight;
Do’s & Don’t: E waste (Management) Amendment Rules 2018
S.No. Do’s Don’t
All electrical and electronic products are required to
be handed over only to the Authorized recycler
The product should be handed over only to authorized
recycler for disposal.
Do not give e-waste to informal and unorganized
sectors like Local Scrap Dealer/Rag Pickers.
Wherever possible or as instructed, separate the
packaging material according to responsible waste
disposal options and sorting for recycling.
Do not donate old electronic items to any body.
Do not dispose your product in garbage bins along with
municipal waste that ultimately reaches landfill.
Always Dispose products that have reached end-of-life
at Panasonic India Authorized Service center.
Keep the product in isolated area, after it becomes non
-functional/un-repairable so as to prevent its accidental
breakage.
The product is not meant for re-sale any unauthorized
agencies/scrap dealer/kabariwalas.
The product is not meant for maxing into household
waste stream.
Do not keep any replaced spare part (s) from the
product in exposed area. Provided information on the catalogue with product
end-of-life.
The product should not be opened by the User himself
/herself, but only by authorized service personnel.
1
2
3
4
5
6