-39-
Slots-B
Slot-C
Screws-A
Green stripe
■
Condenser-lens adjustment
[Adjustment]
1. Turn on lamp with FPC cables of LCD panels removed from ass'y main.
2. Insert a light block sheet in front of the Blue panel to block the blue
light so that yellow light is projected.
3. If the un-uniform color appears on the top or bottom of the screen
as shown in Figure, loosen 4 screws A with hex driver and insert a
slot screwdriver into slots B and turn it to make color uniformity in
yellow.
4. If the un-uniform color appears on the left or right of the screen as
shown in Figure, loosen 4 screws A with the
allen wrench
and insert
a slot screwdriver into slot C and turn it to make color uniformity in
yellow.
5. Tighten the 4 screws A to fix the condenser-lens.
Slots-B
Slot-C
Screws-A
■
Relay-lens adjustment
/1667
/1668
[Adjustment]
1. Turn on lamp with FPC cables of LCD panels removed from ass'y main.
2. Insert a light block sheet in front of the Red panel to block the red
light so that cyan light is projected.
3. If the un-uniform color appears on the top or bottom of the screen
as shown in Figure, loosen 4 screws A with hex driver and insert a
slot screwdriver into slots B and turn it to make color uniformity in
cyan.
4. If the un-uniform color appears on the left or right of the screen as
shown in Figure, loosen 4 screws A with the
allen wrench
and insert
a slot screwdriver into slot C and turn it to make color uniformity in
cyan.
5. Tighten the 4 screws A to fix the Relay-lens.
Green stripe
Green stripe
Green stripe