Sanyo VWM-900 Скачать руководство пользователя страница 3

3

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions. - 

All these safety and oper-

ating instructions should be read before the product is
operated.

2. Keep these instructions. - 

The safety, operating and

use instructions should be retained for future reference.

3. Heed all warnings. - 

All warnings on the product and in

the operating instructions should be adhered to.

4. Follow all instructions. - 

All operating and use instruc-

tions should be followed.

5. Do not use this apparatus near water. – 

For example:

near a bath tub, wash bowl, kitchen sink, laundry tub, in
a wet basement; or near a swimming pool; and like.

6. Clean only with dry cloth. – 

Unplug this product from

the wall outlet before cleaning. Do not use liquid clean-
ers.

7. Do not block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions. - 

Slots and

openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to pro-
tect it from over heating. The openings should never be
blocked by placing the product on a bed, sofa, rug or
other similar surface. This product should not be placed
in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufactur-
er’s instructions have been adhered to.

8. Do not install near any heat sources such as radia-

tors, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are     pro-
vided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replace-
ment of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience recep-
tacles, and the point where they exit from the
apparatus.

11. Only use attachments/accessories specified by

the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the appara-
tus has been exposed to rain or moisture, does
not operate normally, or has been dropped.

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL.

AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock
or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for
installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL ONLY.

Содержание VWM-900

















Отзывы: