10
NORMAL PLAYBACK
PREPARATION
•
Turn on the TV.
•
Be sure the TV is set to the VCR Output Channel (CH 3 or 4).
•
If a direct VIDEO/AUDIO connection is made between the
VCR and the TV, set the TV’s source selector to VIDEO.
1
Insert a prerecorded video cassette.
The TAPE IN indicator will light and the VCR will power-up
automatically.
• Make sure that the TIMER indicator in the VCR indicator panel
is not lighted. If it is, press POWER once.
• If a tape without a safety tab is inserted the unit will start
the playback automatically.
2
Press PLAY once.
The PLAY appears on the TV screen .
• It is not necessary to select the tape speed for playback. It
will be automatically selected by the VCR.
• In playback, the TV/VCR selector switches to VCR mode
automatically.
3
Press STOP to stop playback.
The STOP appears on the TV screen.
• If the tape reaches the end before STOP is pressed, the
VCR will automatically stop, rewind, eject, and it will turn
itself off.
TRACKING CONTROL
AUTO TRACKING
The automatic tracking function adjusts the picture to
remove snow or streaks.
The AUTO TRACKING function works in the following cases:
• A tape is played back for the first time.
• Tape speed (SP, LP, SLP) changes.
• Streaks or snow appear because of scratches on the tape.
MANUAL TRACKING
If noise appears on the screen during playback, press
either CH/TRACK (
D
D
/
E
E
) on the remote control or
CHANNEL (
D
D
/
E
E
) on the front panel until the noise on the
screen is reduced.
• In case of vertical jitter, adjust these controls very carefully.
• Tracking is automatically reset to normal when the tape is
ejected or the power cord is unplugged for more than 3
seconds.
These special effects are available during playback.
VISUAL SEARCH FUNCTION
This function lets you quickly and visually search for a
desired tape section in either direction: forward and
reverse.
During PLAYBACK mode...
1
Press desired search button (FF or REW).
The VCR will be activated in the SEARCH mode.
• If the VCR is left in the SEARCH mode for more than 3
minutes, the VCR will automatically enter the PLAYBACK
mode, to protect the tape and video heads.
2
To continue normal playback, press PLAY.
SPECIAL EFFECTS PLAYBACK
TO WATCH A STILL (or Frame Advance)
PICTURE
During PLAYBACK mode...
1
Press PAUSE or PAUSE/STILL on the front panel.
Still picture will appear on the TV screen.
• If a still picture vibrates vertically, stabilize it by pressing
CH/TRACK (
D
D
/
E
E
) on the remote control.
• If the VCR is left in the STILL mode for more than 5 min-
utes, the VCR will automatically enter the STOP mode to
protect the tape and video heads.
2
Press PAUSE repeatedly to advance the video picture
one frame at a time while viewing a still picture.
3
To continue normal playback, press PLAY.
USING THE SLOW MOTION FEATURE
During PLAYBACK mode...
1
Press SLOW.
The tape will be played back at a speed 1/19 times
slower than the normal speed.
• During slow playback, CH/TRACK (
▲
/
▼
) on the Remote
Control can be used to minimize noise bands.
• When the slow mode continues for more than 3 minutes,
the VCR will automatically change to PLAYBACK mode.
2
Press PLAY to return to normal playback speed or
press STOP to stop tape movement.
Ad JUMP (Advertisement Jump)
This is useful for skipping commercials or short program
segments.
1
Press Ad JUMP during the PLAYBACK mode.
The tape will fast forward picture search through 30 seconds
of recording.
The skipping time can be extended by pressing Ad JUMP.
Subsequent presses result in advancing the fast forward pic-
ture search time by 30-second increments (maximum 3 min-
utes).
2
When the search is completed, the VCR will go into
PLAYBACK mode automatically.
AUTO PLAY SYSTEM
This VCR features full automatic playback and rewind.
Load a cassette (with the safety tab removed).
•
The power turns on automatically and playback begins.
•
At the end of the tape, the VCR stops, then rewinds.
•
The cassette is ejected after rewinding and turn itself off
automatically.
SPECIAL EFFECTS PLAYBACK NOTES:
• Horizontal lines (noise bars) will appear on the TV screen.
This is normal.
• The audio is automatically muted during special effect
modes, so there is no sound during search.
• During the high-speed picture search modes, a short period
is needed to stabilize tape speed when re-entering the
PLAYBACK mode. Slight interference may be observed
during this period.
LOAD
TAPE
AUTO
REWIND
AUTO
POWER
OFF
AUTO
EJECT
AUTO
PLAY
