– 15 –
DscCalDi
x
OK
Focus Result
PZ_SW_A_B: 956
PZ_SW_B_C: 1058
PZ_SW_C_B: 1036
PZ_BR: 22
PZ_SP: 266
AF_SW: 933
AF_BR: 6
AF_WIDE: -9
AF_MID1: -27
AF_MID2: -47
AF_MID3: -51
AF_TELE: -46
!
3-8. Adjust Specifications
1. Lens Adjustment (Infinity)
Preparation:
POWER switch: ON
If using a ready-made collimator, set to infinity.
Note:
Do not vibrate during the adjustment.
Adjustment method:
1. Set a distance of 0.5-1.0 cm between camera lens and
collimator lens when zoom wide edge. Do not touch the
each lens.
2. Set the camera so that it becomes center of the siemens
star chart in the collimator (zoom wide and tele).
3. Double-click on the DscCalDi.exe.
4. Click the “Focus”, and click the “Yes”.
5. Lens infinity adjustment value will appear on the screen.
6. Click the OK.
Adjustment value determination is effectuated using below val-
ues.
The adjustment values fulfill the conditions below, they are de-
termined as within specifications.
Adjustment value determination
PZ_SW_A_B: PZ1
PZ1: adjustment value of zoom PR switch position 1
(945<=PZ1+PBR<=1010)
3-6. The adjustment item which in necessary in part exchange
COMPL PWB CP1
Factory
Cord
Setting
Language
Setting
COMPL PWB ST1
COMPL PWB ST2
ASSY, FLEXIBLE PWB CA1
Reset
Setting
AWB
Adjust-
ment
USB
storage
information
registration
CCD White
Point
Defect
Detect
Adjustment
CCD Black
Point And
White Point
Defect Detect
Adjustment
In Lighted
: Be sure to carry out the necessary adjustments after replacing the unit.
: Adjustment is possible from the menu setting screen of the camera and by using the calibration software.
Lens
Adjust-
ment
(Infinity)
3-7. Updating the firmware
Check the firmware version immediately after the CP1 board has been replaced. If an old version is being used, interfer-
ence and errors in operation may also occur. If an old version is being used, update it with a newer version.
Refer to
3-13. Firmware uploading procedure. (Page 18)
Camera
Collimator
LENS
Содержание VPC-S120DB
Страница 13: ... 13 2 4 BOARD LOCATION ST1 board CP1 board ST2 board ...
Страница 21: ... 21 MEMO ...
Страница 23: ...23 2 1 3 ACCESSORIES SG41G_ACCESSORIES ...
Страница 47: ...Jan 10 SANYO Electric Co Ltd Osaka Japan ...