Sanyo VPC-E10, Руководство по обслуживанию

Страница: 19 / 55

– 19 –
Camera
Pattern box
AF_I_MID7: ZIM7
ZIM7: infinity adjustment value of focus at zoom position
middle7 (–197<=ZIM7<=112)
AF_I_TELE: ZIT
ZIT: infinity adjustment value of focus at zoom position
tele (–196<=ZIT<=89)
3. AWB Adjustment
Preparation:
POWER switch: ON
Setting of pattern box:
Color temperature: 3100
±
20 (K)
Luminance: 900
±
20 (cd/m
2
)
The tester should be used to adjust the voltage between the
terminals of the power connector that is being supplied from
the power supply (voltage between the battery socket termi-
nals of the camera) to 4.1
±
0.1 V.
Adjusting method:
1. When setting the camera in place, set it to an angle so that
nothing appears in any part of the color viewer except the
white section. (Do not enter any light.)
2. Double-click on the DscCalDi.exe.
3. Click the AWB, and click the Yes.
4. AWB adjustment value will appear on the screen.
5. Click the OK.
Adjustment value determination is effectuated using the "AGC",
“6F_AGC”, “CHECK" and "MS" values. If
AGC= a1, a2, a3, a4, a5, a6, a7
6F_AGC= fd1, fd2, fd3, fd4, fd5
CHECK= wc0, wc1, wc2
MS= ms1, ms2
the adjustment values fulfill the conditions below, they are de-
termined as within specifications.
Adjustment value determination
100<a1<300, 250<a2<500, 450<a3<650, 600<a4<850,
750<a5<1023, 600<a6<850, 750<a7<1023
fd1<=10, fd2<=10, fd3<=10, fd4<=10, fd5<=10
wc0=128
±
2, wc1=128
±
2, wc2=130
±
40
2700<=ms1<=4100, 2900<=ms2<=4300
Adjustment values other than the above are irrelevant.
4. CCD White Point Defect Detect Adjustment
Preparation:
POWER switch: ON
Adjustment method:
1. Double-click on the DscCalDi.exe.
2. Select “CCD Defect” on the LCD “Test”, and click the “Yes”.
3. After the adjustment is completed, OK will display.
4. Click the OK.
Dsc Calibration
x
OK
AWB Results:
1:
AGC=173,342,508,677,845
687,855
6F_AGC=0,0,0,0,0
MONIT_X1=173,173,173,173
WB=282,514,800
CHECK=128,128,145
MS=3055,3239
Fno_FOR_ISO=56
SS_FOR_ISO=2450
YLEVEL_FOR_ISO=9597
Copy