background image

i

English

Warning 

TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE

k

FOR AMERICAN USERS

The following advisory is included in accordance with the laws of the State of 
California (USA):

WARNING:

This product contains chemicals, including lead, known to the State of 
California to cause cancer, birth defects or other reproductive harm. 

Wash 

hands after handling.

i

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance 
with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:

h

Reorient or relocate the receiving antenna.

h

Increase the separation between the equipment and receiver.

h

Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.

h

Consult the dealer or an experienced radio/TV technician for help.

i

Changes or modifications not expressly approved by the party responsible 
for compliance could void the user’s authority to operate the equipment.

Declaration of Conformity

Model number: VPC-CS1
Trade Name: SANYO
Responsible party: SANYO North America Corporation
Address: 21605 Plummer Street, Chatsworth, California 91311
Telephone No.: (818) 998-7322
This device complies with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions:
(1)  this device may not cause harmful interference, and
(2)  this device must accept any interference received, including 

interference that may cause undesired operation.

Содержание VPC-CS1 - Full HD 1080 Video





























































































Отзывы: