Sanyo VMC-8618, Руководство по обслуживанию

Страница: 4 / 24

– 4 –
Fig. 2
1. Speaker
When the monitor selector button (A, B or Y/C)
is pressed, the speaker lets you hear the sound
from the components which are connected to
the terminals at the rear of the monitor. (Use
components which produce audio output.)
2. On-screen display button (OSD)
When this button is pressed, the menu screen
appears on the monitor screen.
3. Cursor ( ) button ( )
When this button is pressed, the cursor moves
down. When it reaches the bottom, it reappears
at the top. In addition, this button is used to
make adjustment values smaller.
4. Cursor ( ) button ( )
When this button is pressed, the cursor moves
up. When it reaches the top, it reappears at the
bottom. In addition, this button is used to make
adjustment values larger.
5. Display selector button (ENTER)
If this button is pressed while a picture is on the
monitor screen, the screen changes to the
adjustment screen. If the button is pressed once
more, the picture returns to the previous screen.
1. OPERATING INSTRUCTIONS
1-1. FRONT PANEL CONTROLS
2 4 5 6
7
G
3 F
1
SCAN
9 8
1.COLOR
2.TINT
3.BRIGHTNESS
4.CONTRAST
5.SHARPNESS
6.VOLUME
8.LANGUAGE
9.TITLE
10.VERSION
6. Underscan/overscan select button (SCAN)
The initial setting is for the normal screen
(overscan). If the SCAN button is pressed, the
screen will become smaller (underscan) than
the normal screen. Change this setting in cases
such as when screen display characters are
missing. If the CSAN button is pressed once
more, the normal screen is display again.
7. Monitor A selector button (A)
When this button is pressed, the audio and
video input changes to the component which is
connected to the A terminals at the rear of the
monitor.
8. Monitor B serector button (B)
When this button is pressed, the audio and
video input changes to the component which is
connected to the B terminals at the rear of the
monitor.
9. Monitor Y/C selector button (Y/C)
When this button is pressed, the audio and
video input changes to the component which is
connected to the Y/C terminals at the rear of the
monitor.
10. Power indicator (POWER)
Lights when the power is on.
11. Power button (POWER)
Press this button to turn the power on and off.