Sanyo VMC-8214P, Инструкция по эксплуатации

Страница: 5 / 14

① ①
③
③
④
④
⑤
⑥
⑦
②
②
Speaker AC INPUT socket
Cursor ( ) button ( )
AUDIO/ Y/C terminals:
Cursor ( ) button ( )
SIGNAL I/P switch
Display selector button (ENTER)
Power indicator
Power button ( POWER)
On-screen display button (OSD)
AUDIO/VIDEO terminals:
The speaker lets you hear the sound from the Connect the AC power cord (supplied) securely
When this button is pressed, the cursor moves
When the signal I
/
P switch is turned to Y
/
C
When this button is pressed, the cursor moves
Select the input signal either video (BNC) or
If this button is pressed while the menu is on
the
Lights when the power is on.
Press this button to turn the power on and off.
When this button is pressed, the menu
When the signal I
/
P switch is turned to video
u nit which is Connected to the audio input to this socket and to a wall outlet.
down. When it reaches the bottom, it
side
,
the audio and s
-
video signals from the unit
up. When it reaches the top, it reappears at
Y/C (DIN jack) by the switch
.
m
onitor screen,
the screen changes to the
screen appears on the monitor screen.
Side
,
the audio and video signals from the unit
which is connected to these terminals can be
monitored.
monitored.
terminals at the rear of the monitor.
reappears at the bottom. In addition, this button
Which is connected to these terminals can be
the bottom. In addition, this button is used to
adjustment screen. If the button is
pressed
once
Press the OSD button once more
,
or
is used to make adjustment values smaller.
make adjustment values larger.
more, the picture returns to the previous screen.
Select
"
EXIT OSD
"
and then press
the ENTER button
.
Names of parts
English
3
Front Panel Rear Panel
Pin No
.
Signal