PARTS NAMES
Rear Panel
1
AC INPUT socket
Connect the AC power cord (supplied) securely to this
socket and to a wall outlet.
2
Y/C or VIDEO signal input/output switch
Select the input signal either VIDEO (BNC) or Y/C
(DIN jack).
3
Y/C IN terminal (4-pin mini-DIN)
Connect to the Y/C separate output terminal of a video
camera, VCR or other video equipment.
4
Y/C OUT terminal (4-pin mini-DIN)
Loop-through output of Y/C in terminal. Connect to the
Y/C separate input terminal of a VCR or another
monitor.
5
,
7
HI/LO impeadance switch
When surveillance by single monitor please set the
impedance switch to 75
Ω
, if several monitor
connected in series please set impedance switch to
75
Ω
for the last monitor & others set to HI position.
6
TRAP filter switch (4.43 MHz)
For Model VMC-8414P only
This switch is used to set the 4.43 MHz TRAP filter
function ON/OFF. Set the TRAP filter switch to the ON
position to reduce the cross colour noise.
8
VIDEO IN terminal (BNC-type)
Connect to the video output terminal of video
equipment, such as a VCR or a colour video camera.
9
VIDEO OUT terminal (BNC-type)
Loop-throgh of the video in terminal.
Connect to the video input terminal for VCR or another
monitor.
F
AUDIO IN terminal (RCA jack)
Connect to the audio output terminal of a VCR or other
equipment.
G
AUDIO OUT terminal (RCA jack)
Loop-throgh output of the audio in terminal.
Connect to the audio input terminal of a VCR or
another monitor.
OUT
IN
IN
OUT
AUDIO
IN
OUT
VIDEO
TRAP
HI
ON
OFF
LO
HI
LO
Y/C
VIDEO
Y/C
AC INPUT
OUT
IN
IN
OUT
AUDIO
IN
OUT
VIDEO
TRAP
HI
ON
OFF
LO
HI
LO
Y/C
VIDEO
Y/C
AC INPUT
1
2 3 5
7
8
9
G
F
6
4
Y/C (Mini DIN 4 pin) terminal specification
Pin No.
Signal
1
GND (Y)
2
GND (C)
3
Y
4
C
OUT
IN
4
2
3
1
4
2
3
1
L8MX5/XE (VMC-8114P GB) 2000. 11. 21
4
