35
MENU OPTION—
CH (CHANNEL) SCAN MEMORY
Cannot select or scan some
channels.
Channels may be removed from
memory.
Check antenna connections.
NO digital signal being broadcast.
Weak Signal.
V-Guide is set to block
programming.
Select Channel Scan memory and
manually add channels or start an
“All Channel Search.”
Turn antenna, install signal
booster.
Set V-Guide to “Off” or press
RESET
key to clear all settings and
restart channel search.
SYMPTOM
CHECK THESE CONDITIONS
TRY THESE SOLUTIONS
If you continue to experience problems, please call toll free
1-800-877-5032.
We can Help!
3
Use the
CHANNEL
(
CH
) keys or numerical
0 ~ 9
keys to select desired channel.
HINT:
Press
the
TUNER
key to switch between Digital and
Analog Channel Scan memories.
4
Press the
ENTER
key to delete the channel. The
display will change to “deleted.”
1
Press the
MENU
key to display the Main menu.
2
Use the
CURSOR
keys to highlight
CH Scan
Memory.
Use the
CURSOR
>
key to select the
channel number area.
DELETING ANALOG OR DIGITAL
CHANNELS FROM MEMORY
Channel Scan Memory is a list of active channels that
you can scan through using the
Channel Scan CH
(up)
CH
(down) keys. This list can be customized by delet-
ing and/or adding channels.
After 3 seconds the TV screen will display “Add?”
OPERATING TIPS:
When a digital channel is deleted, all of that
channel’s sub-channels are deleted as well.
Only previously deleted digital channels can be
added back to the Channel Scan Memory.
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
