Sanyo VDC-HD3100 - Full HD 1080p Vandal Dome Camera, Руководство по обслуживанию

Страница: 9 / 40

-
9
-
2. ADJUSTMENT
2-1. Table for Servicing Tools
1. Calibration software
Download the calibration software and the firmware from the
following URL.
http://www.overseas.sanyo.com/dcamera_service/
Place the DscCalDi.exe file, camapi32.dll file and
QrCodeInfo.dll file together into a folder of your choice.
2. Pattern box
Turn on the switch and wait for 30 minutes for aging to take
place before using Color Pure. It is used after adjusting the
chroma meter (VJ8-0192) adjust color temperature to 3100
± 20 K and luminosity to 900 ± 20 cd/m
2
. Be careful of han-
dling the lump and its circumference are high temperature
during use and after power off for a while.
2-2. Setup
1. System requirements
Windows 2000 or XP or Vista
IBM® -compatible PC with pentium processor
USB port
2. Video monitor
Connect the video output to a video monitor with an input
impedance of 75 ohms.
2-3. Adjustment Items and Order
1. AWB Adjustment
2. CMOS White Point Defect Detect Adjustment
3. CMOS Black Point And White Point Defect Detect Adjust-
ment In Lighted
4. Focus Assistance Drive Adjustment
Note: If the lens, CMOS and board and changing the part, it
is necessary to adjust again. Item 1-4 adjustments should be
carried out in sequence.
2-4. Connecting the camera to the computer
1. Connect the camera’s USB terminal to the computer’
USB connector.
2. It turns on power while pushing the FAR button and the
SET button of the operation panel.
3. Double-click on the DscCalDi.exe.
4. L5DK2/--2 is selected with Model Code.
5. PAL (VDC-HD3100P) or NTSC (VDC-HD3100) is
selected with Video Mode.
2-4-1. Computer screen during adjustment
2-4-2. Operation buttons
Firmware
QrCode
AWB
Focus
UV Matrix
R Bright
RGB Offset
Tint
B Bright
Gain
Phase
LCD Calibration Upload
Initialize
LCD Type
H AFC Test
VCOMDC
VCOMPP
Cal Data
Cal Mode
OK
OK
EVF
USB storage
Get
Set VID Set
PID Set
Serial Set
Rev. Set
Setting
Language
Video Mode
VCO
Factory Code
Backrush pulse :
Set Get
Model_Code
Ref. No. Name
Part code
J-1
J-2
J-3
J-4
J-5
J-6
VJ8-0190
VJ8-0192
VJ8-0191
VJ8-0260
VJ8-0282
Pattern box
Calibration software
Chroma meter
Spare lump (pattern box)
Collimator
Spare lump (collimator)
Number
1
1
1
1
1
1
4 4
5
3 2 1 3 2 1
1: NEAR button
2: FAR button
3: SET button
4: REVERSE button
5: RESET button