3
Parts Names and Functions
1
VIDEO OUT connector (BNC type)
Outputs video signal.
Connect this terminal to the video input terminal
of the external device.
2
Control terminals (Push-lock)
Used to perform the control functions such as
controlling the camera remotely or inputting/
outputting alarm.
(A) ALARM IN 1/2 terminal
<Alarm input terminal>
Used to connect the alarm device that
detects intruders.
Connect this terminal to an external alarm
switch or an infrared sensor, etc.
(B) ALARM OUT terminal
Used to connect to an external buzzer or
lamp.
When an alarm is detected, the device
connected to the terminal notifies that an
alarm is detected.
(C) COM terminal (earth terminal)
(D) FOCUS terminal
Used to perform the focus adjustment
remotely by connecting an external switch.
• DC ± (6 - 12 V), +: FAR, –: NEAR
(E) ZOOM terminal
Used to zoom in/out by connecting an
external switch.
• DC ± (6 - 12 V), +: WIDE, –: TELE
Rear panel
RS485
A
B
POWER
VIDEO OUT
ALARM IN 2
ALARM IN 1
ALARM OUT
COM
FOCUS
ZOOM
N.C.
COM
AC24V
DC12V
GND
ALARM IN 2
ALARM IN 1
ALARM OUT
COM
FOCUS
ZOOM
1
4
(B)
(D)
(C)
(E)
(A)
RS485
A
B
N.C.
COM
3
2
(b)
(a)
POWER lamp
b
Push-lock
When connecting the cable, press and hold
down the protrusion of the terminal, insert the
cable into the terminal, and then release the
protrusion.
L5CN2_XE(INSTALLATION).book 3 ページ ２００８年５月７日 水曜日 午後１時１３分
