~
~
GND
+
–
GND
AC
24
/
DC12(-)
AC
24
/
DC12(+)
GND
AC
24
/
DC12(-)
AC
24
/
DC12(+)
CONNECTIONS
Do not connect the power cord until all other
connections have been completed.
• When using an RG-59U (3C-2V) cable, do not let it dangle in the air
or attach it to piping.
• If you use a cable other than the types above, the image or sync
signal will be attenuated and will not be transmitted correctly.
Connection for Monitoring
BNC type
■
Using a Camera Control Unit
When using menus, connect a camera control unit (VAC-70: Separately
ordered) because menu settings can be carried out without removing the
dome cover.
■
To prevent electromagnetic interference
Be sure to attach the supplied clamping core to the cables
as illustrated.
• On the cable for power supply
Note:
Make sure to disconnect the unit after setting or adjustment is
completed.
VAC-70
BNC type
RG-6U (5C-2V) cable,
500 m max.
Connection for Power Supply
Base plate
Cable type
Length
RG-59U (3C-2V)
250 m max.
RG-6U (5C-2V)
500 m max.
RG-11U (7C-2V)
600 m max.
DC 12 V connection
Check that polarity is correct.
Refer to the instruction manual for the connected alarm
device for further details.
CAT5 (+)
CAT5 (-)
485 (A)
485 (B)
GND
WIDE
TELE
AL IN
NC
19
External Alarm
Input Signal
Alarm
device
Printed on recycled paper
1AC6P1P3026--
L5BK2/US, XE (0206KP-SY)
Printed in Japan
AC 24 V connection
Connection for Alarm Input
It is used to make wide angle/telescoping adjustments.
CAT5 (+)
CAT5 (-)
485 (A)
485 (B)
GND
WIDE
TELE
AL IN
NC
19
Zoom Input Signal
TELE
WIDE
Connection for Zoom Input
18 AWG or more
18 AWG or more
L5BK2(INSTALL).book 2 ページ ２００６年３月１０日 金曜日 午前１１時３９分
