-
6
-
2. ADJUSTMENT
2-1. ADJUSTMENT CONDITION
1. Use the 5,100K viewer for the subject.
2. Set the trigger signal of oscilloscope to VIDEO OUT, and
apply H sync unless specified.
3. Set each of the S1001 (CA-1) switches to the all OFF
position.
4. In adjustments without direction to display charts, shield
light with a lens cap to provide dark condition.
5. Connect the video output to a video monitor with an input
impedance of 75
ohms
.
6. The video monitor should be an under-scan TV.
2-2. TABLE FOR SERVICING TOOLS
2-3. PREPARATION
1. Install the adjustment software (VHJ-0189) in a computer
running the Windows operating system.
2. Use the adjustment tool (VHJ-0127) to connect the
camera to be adjusted to the serial port (COM1) of the
computer with RS-232C cross cable (Inter link cross cable,
VHJ-0149), and then turn on the power for the computer .
3. Double-click the adjustment software which has been
installed into the computer.The main window will be
displayed.
4. Click “Adjustment” in the main window menu and click
“L5BG/CJ”. The main dialog window will be displayed.
5. In the main dialog window, click “SET UP”. The setup
window will be displayed.
6. In the setup window, change all other values to the
standard settings (setup window illustration).
7. Click “OK” to accept the settings. The main dialog
window will be displayed.
8. In the main dialog window, click “ADJUSTMENT”. The
adjustment window will be displayed.
9. In the adjustment window, click “START”.
2-3-1. Adjustment parts position
2-3-2. Computer screen during adjustment
Ref. No.
Name
Part code
J-1
J-2
J-3
J-4
J-5
J-6
J-7
VJ8-0007
VJ8-0009
VJ8-0010
VHJ-0126
VHJ-0127
VHJ-0149
VHJ-0188
Color viewer
Color bar chart
Gray scale chart
Commander cable (spare)
Adjustment jig
Inter link cross cable
Calibration software
VR103 VR102
VR101 VR104
TP101 GND
S1001
TP211
CT221
TP232
CT231
CN205
CA-1 board Side A
CA-2 board Side A
CA-2 board Side B
R V X Z H W
AF AG AX AY BC BG BH BU
I Co
dspcctv - DSP Camera Control for Windows95/98/Me/2000 Ver.
Exit Adjustment Set View Help
DSP
CAM
Ready
NUM
L53R
L53V
L53X
L53Z
L53H
L54W
L5BG/CJ
R V X Z H W
AF AG AX AY BC BG BH BU
I Co
dspcctv - DSP Camera Control for Windows95/98/Me/2000 Ver.
Exit Adjustment Set View Help
DSP
CAM
Ready
NUM
L5BG
MODEL
ADJUSTMENT
ADD
SETUP
COPY
DEL
CLOSE
Main window
Main dialog window
Содержание VCC-9684VA - 1/4" Color CCD Indoor Mini Dome Camera
Страница 39: ...Nov 07 SANYO Electric Co Ltd Osaka Japan ...