CONNECTIONS AND INSTALLATION
2
Install the camera unit onto the base.
Connect the video signal cable plug (
B
) and the power supply cable plug (
C
) from the base
to their respective connectors on the camera unit. Then install the camera unit onto the
base.
3
Securely tighten the four camera unit fixing screws (D) evenly.
Camera removal
1
Loosen the four camera unit fixing screws (A) evenly.
2
Turn the camera unit of about 80˚, in the direction of the arrow shown on the
illustration.
Turn the camera unit all the way until screw (
B
) on the base reaches the tab.
3
Remove the camera unit.
To remove the camera unit, carefully apply a slight force until the screw (
B
) goes over the
tab, then carefully remove the camera unit.
CAUTION:
•
When removing the camera unit, be careful not to hurt yourself with the camera unit
fixing screws.
•
When removing the camera unit, be careful as the video signal plug (
B
) or power supply
plug (
C
) cables are short and may become unplugged.
A
A
A
A
B
B
B
C
L53D4/US GB 1998, 3, 10
10
English
