Main Features
• 1/3-inch CCD image sensor with approx. 410,000 picture elements.
• High horizontal resolution of 540 TV (typical) lines for maximum
details and a noticeably sharper, clearer picture.
•
E-Day/Night function (Electronic Day/Night)
The new E-Day/Night function allows an automatic changeover
from color mode to B/W mode. This makes it possible to achieve
24-hour high-quality in light and dark conditions.
•
High sensitivity
Sensitivity has significantly increased by about 6dB compared to
conventional models. A newly-developed CCD sensor partners
with SANYO’s advanced technologies to enable the camera to
clearly capture objects even in dark conditions.
•
High sensitivity for monitoring
Minimum required illumination of 0.25 lx (50 IRE) or 0.1 lx (20 IRE)
with F1.2 lens at high gain.
• Excellent immunity to shock and vibration using all solid-state
components.
• Accurate color is achieved by processing image data through a
color complementary Ye-Cy-Mg-G mosaic filter.
• Built-in DSP (digital signal processing) circuitry delivers superior
color reproduction and reduced noise.
• Two types of backlight compensation selectable.
Multi-spot photometry system:
Luminance is measured in 64 separate areas for
optimum backlight compensation even for peripheral and moving objects; features
selectable normal and high modes.
Centre-zone photometry system:
Luminance measured at centre and automatic lens
aperture adjustment enable a clear image even when backlit.
Other Features
• TTL auto tracing white-balance system
• Equipped with electronic iris (indoor use)
• Internal / Line-Lock synchronisation system
• DC type auto iris lenses applicable
540 TVL (typical) Cameras for Greater Peace of Mind
VCC-XZ600
VCC-XZ600N
IP Camera
1/4" Color CCD DSP
High-resolution Weatherproof
Day/Night AF Zoom Camera
VCC-9684VA
1/4" Color CCD
Indoor Mini Dome Camera
VCC-5884 E
1/3" Color CCD DSP
High-resolution Camera
VCC-9800/9700/
9600/9500
1/4” Color CCD High-Resolution
AF Speed Dome Cameras
VCC-4794 E
1/3" Color CCD DSP
Day/Night Camera
VCC-ZM600
VCC-ZM600N
IP Camera
1/4" Color CCD DSP
High-resolution Day/Night
AF Zoom Camera
SANYO Electric Co., Ltd.
Digital System Company
http://www.sanyosecurity.com
©2008 SANYO Printed in Japan 2008.7 MA
SFA179F
Surface type
VCC-9800
VCC-9600
VCC-6584DN
Caution:
Please consult the instruction manual to ensure safe and proper operation of the product.
Digital System Company of SANYO Electric Co., Ltd. obtained
Quality Management System ISO 9001 and Environmental
Management System ISO 14001 certifications.
EC00J0303
051
Distributed by:
NOTE: Specifications subject to change without notice.
Model No.
Scanning system
Image sensor
Effective picture elements
Horizontal resolution
Minimum illumination
(approx.)
Video output level
Video S/N ratio
Backlight compensation
White balance
Gain control
Light control
Lens mount
Flange back
Auto iris lens
Auto iris output
Lens iris level
Electronic iris
Electronic iris range
Synchronizing system
V phase adjustment
Sockets Video signal
Auto iris lens
Power supply
Operating
Storage
Power requirement
Power consumption (approx.)
Camera mount
Dimensions (approx.)
Weight (approx.)
Specifications
VCC-6584DN
NTSC Standard 525 lines, 30 frames/sec.
1/3” (approx. 4.8 x 3.6 mm) interline transfer method CCD
768 (H) x 494 (V)
540 TV lines (typical)
0.14 lx (at F1.2, GAIN: HI, color mode), 0.1 lx (at F1.2, GAIN: HI, B/W mode)
0.35 lx (at F1.2, GAIN: HI, color mode), 0.25 lx (at F1.2, GAIN: HI, B/W mode)
1.0 V (p-p) / 75 ohms, composite
More than 50 dB (AGC off)
ON / OFF — Slide SW (side)
ON = Multi-spot photometry (64-section) / Center-zone photometry system
— Slide SW (side) (activated when auto iris lens used)
Auto / Manual — Slide SW (side)
Normal / High — Slide SW (side)
Auto iris / Electronic iris
CS mount (top/bottom selectable)
12.5 mm
±
0.5 mm adjustment
DC type
DC: Drive coil (+, –), Brake (Damp) coil (+, –)
LEVEL: L to H — VR (side)
ON (EI) / OFF (AI) — Slide SW (side)
0.35 to 50,000 lx (with F1.2 lens) GAIN HIGH (Color mode)
0.35 to 50,000 lx (with F1.2 lens) GAIN HIGH (B/W mode)
Internal sync / Line lock — Slide SW (side)
LINE PHASE — VR (rear)
VIDEO OUT — BNC (rear)
LENS — 4-pin (side)
24V AC, GND — 3-pin terminal (rear)
12V DC, GND — 2-pin terminal (rear)
Temperature: –10˚C to 50˚C (14˚F to 122˚F), Humidity: within 90% RH
Temperature: –20˚C to 70˚C (–4˚F to 158˚F), Humidity: within 70% RH
24V AC, 60 Hz / 12 to 15V DC
3.6 W
1/4” – 20 UNC (top/bottom selectable)
56 (W) x 45 (H) x 99 (D) mm
[2.21 (W) x 1.77 (H) x 3.9 (D) in.] (excluding protrusions)
260 g [9.17 oz] (without lens)
Operating
conditions
[Unit: mm (inch)]
Dimensions
56 (2.20)
28 (1.10)
45 (1.77)
1/4"–20UNC
Threaded hole
(top / bottom selectable)
25.8
(1.02)
10.7
(0.42)
16
(0.63)
1.4
(0.06)
9
(0.35)
108 (4.25)
99 (3.90)
COLOR CCD CAMERA
LENS
LENS 4-pin
POWER
VIDEO OUT
GND AC24V
DC12V
CLASS 2
WIRING
~ ~
+
-
Rear panel
20IRE
50IRE
