Sanyo VCC-4374P Скачать руководство пользователя

Страница: 8 / 18

MOUNTING THE LENS

Please use a DC type auto-iris lens (sold separately).

Checking the lens mount

Do not use a lens if length “

” is more than

mm. If not, that may damage the camera and prevent

proper installation.

Remove the lens mount cap from the camera.

Install the auto-iris lens.

CS mount type lens

Carefully align the lens mount with the camera opening, then turn the lens slowly to install it.

C mount type lens

To allow for flange-back adjustment, install the supplied

C-mount adaptor

on the lens mount, then

carefully align the lens mount with the camera opening and turn the lens slowly to install it.

Connect the lens plug to the lens iris output connector (LENS) on the side of the camera.

When using lenses from other makers, the plug shape may not correspond to the terminal on the camera.
In such a case, remove the original plug and using a soldering iron, connect the supplied

lens iris plug

according to the diagram. (Refer to page

C mount type lens

CS mount type lens

L53U4/XE GB 1999, 11, 17

English

Содержание VCC-4374P



















Результаты поиска

Содержание VCC-4374P

Отзывы:

Похожие инструкции для VCC-4374P

Бренды по названию

Популярные бренды

Sanyo VCC-4374P, Инструкция по эксплуатации

Результаты поиска

Содержание VCC-4374P

Отзывы:

Похожие инструкции для VCC-4374P

Бренды по названию

Популярные бренды