SETTINGS
Backlight compensation setting
Set the
BLC
switch to the
ON
position, to engage the backlight
compensation function.
Note:
You will need to set the
LEVEL
(VR401) volume when shooting in
the conditions described below.
L (counterclockwise):
To decrease the contrast
H (clockwise):
To increase the contrast
•
If shooting simultaneously in a dark room and through a bright
window.
•
If the subject background is extremely bright or dark.
•
If the brightness of the picture on the monitor is not correct.
L
E
V
E
L
DC
VIDEO
A. I.
LENS
L
H
VR401
ON
OFF
BLC
ON
OFF
BLC
L
E
V
E
L
L
H
VR401
LENS ADJUSTMENTS
After having installed the camera, adjust the lens zoom and
focus while looking at the image on the monitor screen.
1
Remove the lens cover by turning then pulling it as
illustrated.
2
Loosen the knob on the zoom ring then adjust it as
required by turning it towards T (zoom-in) or W
(zoom-out).
3
Loosen the knob on the focus ring then adjust it until the
image is clear by turning it towards N (near) or
∞
(infinity).
When the lens is properly adjusted, tighten the knob on
the zoom ring and the focus ring, then install the lens
cover to protect it.
3
2
1
L73J2/XE GB 1997, 1, 8
6
English
