PARTS NAMES
1
Video output connector (VIDEO OUT: BNC type)
Connect this connector to a device such as a VCR or monitor with a
VIDEO IN
connector.
2
External sync composite video signal input connector (VS IN: BNC type)
Connect to this connector the synchronizing signal output from a synchronizing signal device or the composite
signal of a video distributor.
3
Power indicator (POWER)
Comes on when the power to the camera is on.
4
12 V DC input terminal (12 V DC, NC)
5
Camera setup section (under the cover)
These settings are for when using a 1/3 inch CS mount
DC
(without
EE
internal amplifier) type lens. However,
if due to installation conditions or environment the settings may need to be modified for best results (see
"
SETTINGS
").
To access the controls, loosen the cover fixing screw
A
, then remove the cover.
6
Lens iris output connector (LENS)
This 4-pin connector is used to send the DC control signal and power supply to an auto-iris type lens.
1
2
3
4
5
6
A
L73T2/XE GB 1999, 10, 18
English
3
