Sanyo TLS-S8000P Скачать руководство пользователя страница 13

Страница: 13 / 48

CHANGING THE ON-SCREEN DISPLAY

Selecting the On-screen Display

You can select to display or not the date, time, the
number of alarm recordings and tape speed.

Turn the power on to all devices used.

Press the MENU button until the (SET UP 2) menu
is displayed.

@@@@@@@<SET@UP@2>

*DISPLAY

@@@DATE@@@@@@@@@@@Y

@@@TIME@@@@@@@@@@@Y

@@@ALARM@COUNT@@@@Y

@@@SPEED@@@@@@@@@@Y

*BUZZER

@@@ALARM@IN@@@@@@@Y

@@@TAPE@END@@@@@@@Y

@@@KEY@IN@@@@@@@@@N

@@@WARNING@@@@@@@@Y

Turn the JOG dial clockwise, until the desired item
for which the display function will be set is flashing.

Turn the SHUTTLE ring to set “Y” for the functions
described below.

DATE . . . . . . . . . . . The date is displayed

TIME . . . . . . . . . . . . The time is displayed

ALARM COUNT . . . The number of alarm

recordings is displayed

SPEED . . . . . . . . . . The recording/playback

speed mode is displayed

Press the SEARCH/AUDIO ON button to save the
settings.

NOTE:

If the ON SCREEN switch is set to the “ON” position,
the items for which “Y” is set are recorded. The items
for which “N” was set at step

above are not

recorded.

Changing the Date/Time Display
Position

Turn the power on to all input devices to the VCR.

Set the ON SCREEN switch to the “ON” position.

The date and time are displayed.

15-10-2001@MON@000

15:20:00@@@3

Press the SHIFT

(or

]

) button.

The display will move towards the right (or the
bottom).

NOTES:

If the SHIFT

(or

]

) button is kept pressed for 1

second or more the display will move at a faster
speed.

The display position cannot be changed while
recording.

RE4QS/EX (TLS-S8000P GB) Wed. May, 23/2001

English

Содержание TLS-S8000P

















































Результаты поиска

Содержание TLS-S8000P

Отзывы:

Бренды по названию

Популярные бренды

Sanyo TLS-S8000P, Инструкция по эксплуатации

Результаты поиска

Содержание TLS-S8000P

Отзывы:

Бренды по названию

Популярные бренды