6. Pause Function
7. Mute Function
8. DEL Button
9. Phonebook Button
Allows you to insert a temporary pause during dialling sequence. For
example, dialling an international number (e.g.: 011-886-22-795-1234),
some telephone company systems will not register the entire number
entry without a pause between the prefix numbers. You may have to
dial 011-
dial 886 -
. This allows adequate timing for the
phone number to register with the telephone company's system and
complete the call.
If you wish to speak privately to someone else in the room without
your caller overhearing, just press the
button once and the LCD
will display
. To resume normal conversation, just press the
button once again.
When the number you want to remove displayed on the LCD, press
the
button, the LCD will show "
, press the
button again
to remove this number.
When your Caller ID phone is in use mode, you can press the
button once to stop the timer, press it once more to restart it. Also the
timer can start after dialling out the call about 10 seconds and stop
when hanging up.
Press the
button to enter the phone book directly. Refer to
"
", section "
".
RD/P
RD/P
MUTE
MUTE
MUTE
DEL
DEL?"
DEL
DEL
FUNCTION OPERATIONS
PHONE BOOK
5
10
4. LANGUAGES SELECTING
English1, Greek,
Australian,
English2, Spanish, Dutch, French,
German, Polish, Swedish, Danish, Finnish
Norwegian
5. AREA & LONG DISTANCE CODE SETTING
The unit support multi languages, including
and
.
Press the
button when the LCD shows
to enter
the language setting. Use
or
button to select the language. Press
the
button to confirm and exit.
(Only under "English1", "English2", "Greek", "Austral", "Czech", "Slovak"
and "Turkish" language and in on-hook state, the setting can be done.)
DIAL
SET LANGUAGE
DIAL
t
Czech, Slovak, Turkish,
s
When you use this phone for the first time, or move to an area that has
different area code, you must enter your area code. This is necessary
because the phone must distinguish local or long distance calls to
properly dial calls from the Caller ID list.
Press the
button when the LCD shows
to
enter the setting.
Press
or
button to select the correct digit.
Press the
button to confirm and enter the next digit setting.
When the area code setting has been completed, press the
button to confirm and the LCD displays
. The unit
enters the long distance code setting.
Repeat the step 2 3 to finish the setting for LDS code and press
the
button to exit.
DIAL
SET AREA & LDS
DIAL
DIAL
SET LDS CODE
DEL
t
~
s
1.
2.
3.
4.
5.
6. FLASHING TIME SETTING
Press the
button to enter this setting when the LCD shows
and then the current value will display.
Use the
button to set the flash time (100ms/120ms/300ms/
600ms). Press the
button to confirm and exit.
SET
FLASH
DIAL
DIAL
or
t
s
