Sanyo SRC-800A, Инструкция по эксплуатации

Страница: 26 / 42

ALARM RECORDING
Alarm Search
To go to the beginning of a desired alarm recording.
1
Press the SEARCH button during stop mode.
ø
“AL SEARCH 01” appears on screen.
2
Press the
l
(or
j
) button to set the desired alarm
number (01 to 99), then press the FF (or REW)
button.
ø
The desired alarm is searched for and a still
image of the beginning of the alarm recording
appears on-screen.
NOTE:
œ
The alarm number is relative to the actual tape
position. (Please refer to the illustration below.)
3
Press the PLAY button.
ø
Playback starts.
NOTES:
œ
If the end of the tape is reached during a search, the
tape will rewind and stop. If the beginning of the tape
is reached, it will stop.
œ
This function does not operate when a warning
display appears on the digital display.
Alarm Scan
To look for an alarm recording by viewing the first 5
seconds of each alarm recording.
1
Press the SEARCH button twice during stop mode.
ø
“AL SCAN” will be displayed on screen.
2
Press the FF (or REW) button.
ø
The unit will advance (or rewind) the tape at
high speed and playback the first 5 seconds of
every alarm recording.
ø
To cancel the alarm scan mode, press the
STOP button.
3
While the desired recording is being played back,
press the PLAY button.
ø
Playback starts and alarm scan mode is
canceled.
NOTES:
œ
If the end of the tape is reached during a scan, the
tape will rewind and stop. If the beginning of the tape
is reached, it will stop.
œ
This function does not operate when a warning
display appears on the digital display.
Playback
1 1 2
Rewind direction Fast-forward direction
Actual position
Alarm number 2
Alarm trigger input point
NF4Q/NA2 (SRC-800A GB) Tue. Sept., 10/2002
English
25